Fiilada Baska ee Bosch CAN 1 Lamaane 120ohm ah oo gaashaan ah
Dhismayaasha
1. Kondurator: Naxaas aan ogsijiin lahayn oo isku xiran.
2. Dahaarka: S-FPE.
3. Aqoonsi:
1 Lamaane: Cadaan, Bunni.
1 Afargeesle: Cad, Bunni, Cagaar, Jaalle.
4. Duubista Cajaladda Polyester-ka.
5. Shaashad: Silig naxaas ah oo qasacadaysan oo tidcan.
6. Galka: PVC/LSZH.
7. Galka: Fiyoolat.
Heerarka Tixraaca
BS EN 60228
BS EN 50290
Tilmaamaha RoHS
IEC60332-1
Heerkulka Rakibaadda: Ka Sarreeya 0ºC
Heerkulka Hawlgalka: -15ºC ~ 70ºC
Gacanka Laabista Ugu Yar: 8 x dhexroorka guud
Waxqabadka Korantada
| Danab Shaqeynaya | 250V |
| Danabka Tijaabada | 1.5KV |
| Impedance Astaamaha | 120 Ω ± 10 Ω @ 1MHz |
| DCR-ka hagaya | 89.50 Ω/km (ugu badnaan @ 20°C) ee 24AWG |
| 56.10 Ω/km (ugu badnaan @ 20°C) ee 22AWG | |
| 39.0 Ω/km (ugu badnaan @ 20°C) ee 20AWG | |
| Iska caabinta dahaarka | 500 MΩhms/km (ugu yaraan) |
| Awoodda Wadajirka ah | 40 nF/Km @ 800Hz |
| Xawaaraha Faafinta | 78% |
| Qaybta Lambarka. | Kondurka | Dahaarka | Galka | Shaashadda (mm) | Guud ahaan |
| AP-CAN 1x2x24AWG | 7/0.20 | 0.5 | 0.8 | TC Tidcan | 5.4 |
| AP-CAN 1x4x24AWG | 7/0.20 | 0.5 | 1.0 | TC Tidcan | 6.5 |
| AP-CAN 1x2x22AWG | 7/0.25 | 0.6 | 0.9 | TC Tidcan | 6.4 |
| AP-CAN 1x4x22AWG | 7/0.25 | 0.6 | 1.0 | TC Tidcan | 7.5 |
| AP-CAN 1x2x20AWG | 7/0.30 | 0.6 | 1.0 | TC Tidcan | 6.8 |
| AP-CAN 1x4x20AWG | 7/0.30 | 0.6 | 1.1 | TC Tidcan | 7.9 |
Fiiro gaar ah: Fiiladani looguma talagalin codsiyada korontada.
CAN Bus (Shabakadda Aagga Xakamaynta) waa nidaam aan wax laga qaban karin oo loogu talagalay baahiyaha isbeddelka degdega ah ee warshadaha otomaatiga ah. Waxay la jaanqaadaysaa heerka caalamiga ah ee CAN ISO-11898. Sababtoo ah dabeecaddeeda adag awgeed, si weyn ayaa loogu qaatay warshadaha baabuurta. Noocyo dhowr ah oo fiilooyinka CAN Bus ah ayaa la sameeyay si loo daboolo baahiyaha isbeddelka degdega ah ee warshadaha otomaatiga ah. Nooca jaakadda PVC ama LSZH waxaa loogu talagalay codsiyada taagan ama isticmaalka aan sun ahayn sida fiilada basaska goobta.
Codsiga Nidaamka Basaska CAN
● Gawaarida rakaabka, gawaarida xamuulka qaada, basaska (gawaarida gubanaysa iyo gawaarida korontada ku shaqeeya).
● Qalabka beeraha.
● Qalabka elektarooniga ah ee duulista iyo hagista.
● Otomaatig warshadeed iyo xakamaynta farsamada.
● Wiishashka, wiishashka.
● Qaab-dhismeedka otomaatiga ah.
● Qalabka iyo qalabka caafimaadka.
● Tareenada/tareenada moodeelka ah.
● Maraakiibta iyo codsiyada kale ee badda.
● Nidaamyada xakamaynta nalalka.
● Daabacayaasha 3D.