Fiilo koronto oo aan dahaaranayn oo PVC ah oo aan dahaaranayn oo H07V-K 2500V Fiilo Fine ah oo hal xudunta ah oo isku xiran
DHISMAHA FIILALKA
| Kondurka | Bare Cu-conductor, ilaa DIN VDE 0295 cl.5, silig-fiican, BS 6360 cl.5, IEC 60228 cl.5 |
| Dahaarka | Dahaarka asaasiga ah ee nooca isku-dhafka PVC TI1 ilaa DIN VDE 0207-363-3 / DIN EN 50363-3 iyo IEC60227-3s |
XOGTA FARSAMADA
| Xudunta hal-geesoodka ah ee PVC | ilaa DIN VDE 0285-525-2-31/DIN EN 50525-2-31 iyo IEC 60227-3 |
| Heerkulka kala duwan | dabacsanaan - 5°C ilaa +70°C rakibid go'an - 30°C ilaa + 80°C |
| Danab magac leh | 450/750 V |
| Danabka tijaabada ah | 2500 V |
| Iska caabinta dahaarka | ugu yaraan 10 MΩ x km |
| Gacanka ugu yar ee laabista | Xudunta rakibidda go'an Ø≤ 8 mm: 4x xudunta Ø |
xudunta Ø > 8-12 mm: xudunta 5x xudunta Ø xudunta Ø > 12 mm: xudunta 6x Ø
CODSIGA
Xudunta hal-halka ah waxay ku habboon yihiin in lagu dhejiyo tuubooyinka, hoostooda iyo dusha sare ee balastaradaha iyo sidoo kale tuubooyinka rakibidda ee xiran. Kuwaas looma oggola in lagu rakibo si toos ah loogu dhejiyo saxaaradaha fiilooyinka, kanaalada ama haamaha. Noocyadan waxaa loo oggol yahay fiilooyinka gudaha ee qalabka, qaybiyaha iyo looxyada wareejinta iyo sidoo kale in lagu xiro nalalka iyadoo la adeegsanayo danab magac leh oo gaaraya 1000 V ama ilaa 750 V oo ah koronto toos ah oo ka dhan ah dhulka.
H07V-K/ (H)07V-K CABBIRKA
| Aagga qaybta isgoyska ah | Dhexroorka dibadda qiyaastii. | Miisaanka naxaasta |
| mm² | mm | kg / km |
| 1.5 | 2.8 – 3.4 | 14.4 |
| 2.5 | 3.4 – 4.1 | 24.0 |
| 4 | 3.9 – 4.8 | 38.0 |
| 6 | 4.4 – 5.3 | 58.0 |
